Sanand, Ahmedabad, Gujarat
- GST NO. : 24CXWPP9877P1ZT
FW1 Flow Switch Supplier
| Business Type | Exporter, Supplier |
| Switch | Reed switch |
| Nominal width | DN 8..25 |
| Process connection | Female thread G 1/4..G 1 (further process connections available on request) |
| Click to view more | |
Preferred Buyer From
| Location | Worldwide |
Technical data
Tolerance
±10 % of full scale value
Pressure resistance
PN 100 bar optionally up to PN 800 bar
Media temperature
-20..+90 °C
Ambient temperature
-20..+70 °C
Media
Water (oils and aggressive media available on request)
Switching voltage
Max. 230 V AC
Switching current
Max. 0.5 A
Switching capacity
Max. 50 VA
Protection class
2 - safety insulation
Ingress protection
IP 67
Electrical connection
For round plug connector M12x1, 4-pole
Materials medium-contact
CW614N nickelled, CW614N, POM, 1.4310, hard ferrite
Non-mediumcontact materials
PC, 1.4301, 1.4305
Make
Honsberg
Download
ViewDetails :
- Economical design
- High switching power
- Insensitive to dirt
Characteristics : Mechanical flow switch, for fluid media, with spring-supported piston and magnetic triggering of a reed switch. Robust construction in brass and POM.
Handling and operation :
- Include straight calming section of 5 x DN in inlet and outlet
- Include a filter if the media are dirty (use magnetic filter for ferritic components).
- It must be ensured that the values given for voltage, current, and power are not exceeded.
- When switch on, a load must be connected in series.
- The electrical details apply to ohmic loads. Capacitive, inductive and lamp loads must be operated using a protective circuit.
Options :
- Switching value for oil
- Special values
- Cable outlet 3 m
- Pressure stages PS 500 and PS 800 for DN 15
Ordering information :
- Specify direction of flow, medium, and switching range.
- For oils. State viscosity, temperature and designation (e.g. ISO VG 68) (enquire about switching range).
Looking for "FW1 Flow Switch" ?
Piece
Explore More Products
