Sanand, Ahmedabad, Gujarat
MOQ : 100 Piece
Business Type : Exporter, Supplier
Technical data
Sensor | Vortex principle |
Nominal width | DN 8..25 |
DN 8..25 | Female thread G 1/4..G 1 (others available on request) |
Pressure resistance | PN 10 bar |
Media temperature | 0..60°C |
Ambient temperature | -20..+70°C |
Supply voltage | 10..30 V DC |
Current consumption at rest | Approx. 20 mA (without load) |
Electrical connection | For round plug connector M12x1, 4-pole |
Ingress protection | IP 67 |
Conformity | CE |
Make | Honsberg |
Download | ![]() |
Preferred Buyer From
Location | Worldwide |
Details :
Handling and operation : The vortex flow meter requires a run-in length of 5..10 x D in order to achieve its specified accuracy. If deposits are to be expected, sensor and electronics should not be installed underneath. It should be ensured that the sensor is installed in the direction of the flow arrow. If the sensor is to be cleaned, the clamps should be released, and the device removed (the pipe should be pressure-free for this). It should be ensured during cleaning that the oscillating vortex body is not exposed to impact (in the moulded part there is a sensitive piezo-ceramic sensor, which can break).
Accessories :