Honsberg Flow Meters

GK Flow Meter
Send Enquiry

Technical data

Switch Optional reed switch
Nominal width DN 10.0.25
Tolerance ±1 % of the full scale value and ±3 % of the measured value
Media Water, gases
Process connection Maleable cast iron, female thread Rp 3/8 "..Rp 1 "

Details :

  • Large, easily visible scale
  • Set-point indicator
  • Optionally switching output


Characteristics : A float moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the flow rate on the scaled measurement tube.

Handling and operation :

  • Include straight calming section of 5 x DN in inlet and outlet
  • If the media are dirty, install a filter (use magnetic filter for ferritic components).
  • It must be ensured that the values given for voltage, current, and power are not exceeded.
  • When switched on, a load must be connected in series.
  • The electrical details apply to ohmic loads. Capacitive, inductive and lamp ...

Read More...


Yes! I am interested


GR-065GK Flow Meter
Send Enquiry

Technical data

Switch Without
Nominal width DN 4
Process connection Female thread 1/8 " NPT
Tolerance ±5 % of full scale value
Pressure resistance PN 12 bar
Medium temperature -20..+90 °C
Ambient temperature -20..+70 °C
Media Water, gases
Electrical data none
Materials medium-contact Borosilicate glass, glass, stainless steel, FKM
Non-mediumcontact materials Glass, CW614N valve: ABS, CW614N
Weight 0.5 kg

Details :

  • Minimum measurement quantity
  • Convex cut for enlargement
  • Optionally valve
  • Good resistance to medium


Characteristics : A float moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the flow rate on the scaled measurement tube.

Handling and operation :

  • Include straight calming section of 5 x DN in inlet and outlet
  • If the media are dirty, install a filter


Options :

  • Float made from sapphire, tantalum, or carbon
  • Brass valve
  • Valve with fine adjustment
  • Special ranges are possible


Ordering information :

  • Specify direction of flow, medium, and display range.
  • For gases, state pressure (relative or absolute), temperature and medium (e.g. air) (request display range)

Yes! I am interested


UK-020 Flow Meter
Send Enquiry

Technical data

Switch Without
Nominal width DN 4
Process connection Female thread 1/8 " NPT
Tolerance ±5 % of full scale value
Pressure resistance PN 6 bar
Medium temperature -20..+65 °C
Ambient temperature -20..+65 °C
Media Water, gases
Electrical data None
Weight 0.13 kg

Details :

  • Frontal scale imprint
  • Optionally valve
  • Installation plate


Characteristics : A float moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the flow rate on the scaled measurement tube.

Handling and operation :

  • Include straight calming section of 5 x DN in inlet and outlet
  • If the media are dirty, install a filter


Options :

  • Metering ranges and special scales under defined operating pressures / temperatures
  • Seal made of FKM only for brass construction)


Ordering information :

  • Specify direction of flow, medium, and display range.
  • For gases, state pressure (relative or absolute), temperature and medium (e.g. air) (request display range)

Yes! I am interested


UZ Flow Meter
Send Enquiry

Technical data

Switch Optionally micro switch
Nominal width DN 15..50
Process connection Female thread G 1/2..G 2
Tolerance ±3 % of full scale value
Medium temperature -20..+100 °C
Ambient temperature -20..+70 °C
Media Water (oils and aggressive media available on request)
Switching voltage Max. 250 V AC
Switching current Max. 5 A
Protection class 2
Ingress protection IP 65
Electrical connection Plug DIN 43650-A / ISO 4400
Non-mediumcontact materials CW614N chromed, steel chromed, acrylic, FKM

Details :

  • Monitor and display
  • Simple switching point adjustment by means of drag indicator
  • Insensitive to dirt
  • Suitable for media with ferritic particles.


Characteristics : With the UZ paddle flow display, the flow strength of the medium presses the paddle against a spring force. Hermetically separated by the bellows, the paddle's deflection is transmitted to a display movement, and may optionally be monitored with an adjustable micro switch. There is no magnet in the area of flow.

Handling and operation :

  • Include straight calming section of 5 x DN in inlet and outlet
  • If the media are dirty, install a filter.
  • It must be ensured that the values given for voltage, current, and power are not exceeded.
  • When switched on, a load mu...

Read More...


Yes! I am interested


Technical data

Size Multisizes
Material Metal
Feature Accuracy, Digital Water Meter Display, Lorawan Compatible, Multi Jet, Spiral Water Meter
Usage Industrial
Operating Temperature 10-50D/C, 50-100D/C
Automatic Grade Automatic
Warrenty 2 Years

We make available Honsberg Vortex Type Flow Meter which is acclaimed for its make & durability. Raw material that is sourced from the reliable places is used as input in the production procedure. In order to make high quality range of products, we check it for quality prior to sourcing. Our company is capable of delivering consignments on time owing to an efficient trading network we have.


Yes! I am interested




Looking for Product Name ?